Note to users. If you're seeing this message, it means that your browser cannot find this page's style/presentation instructions -- or possibly that you are using a browser that does not support current Web standards. Find out more about why this message is appearing, and what you can do to make your experience of our site the best it can be.


Sci. STKE, 9 March 2004
[DOI: 10.1126/stke.2232004pl7]

Erratum

The following corrections should be noted for the Protocol "Monitoring Apoptosis with Fluorescent Zn2+-Indicators" by Kimura et al.

Recipe 3 was missing the directions for the preparation of the Stock Solution. This Stock Solution should also be used in Recipes 7 and 8.

Recipe 3: Zn2+-Detection Solutions
Stock Solution
Add 3.2 mg of L1•(HCl)4•(H2O)2 to 0.5 ml of HBSS for a final concentration of 10 mM Store at 4°C.
Zn2+-Detection Solution 1
Add 50 µl of Stock Solution to 5 ml of HBSS for a final concentration of 100 µM. Store at 4°C.

Recipe 7: Apoptosis-Detection Solution 1
Reagent Amount Final Concentration
L1•(HCl)4•(H2O)2 Stock Solution 50 µl 100 µM
(Recipe 3)    
PI, 10 mM 15 µl 30 µM
Add to 5 ml of HBSS. Store at 4°C.

Recipe 8: Apoptosis-Detection Solution 2
Reagent Amount Final Concentration
L1•(HCl)4•(H2O)2 Stock Solution 50 µl 100 µM
(Recipe 3)    
PI 1.0 mg 30 µM
Annexin V-Cy3 50 µl 1:100
Prepare in 5 ml of the binding buffer included in the Annexin V-Cy3 kit. Use immediately.

A corrected PDF is available starting April 27, 2004.

A PDF of the protocol as originally published with the incorrect recipes is also available http://stke.sciencemag.org/cgi/data/sigtrans;2004/223/pl7/DC1/1.


To Advertise     Find Products


Science Signaling. ISSN 1937-9145 (online), 1945-0877 (print). Pre-2008: Science's STKE. ISSN 1525-8882