Research ArticleChannel Biology

A calcium-accumulating region, CAR, in the channel Orai1 enhances Ca2+ permeation and SOCE-induced gene transcription

See allHide authors and affiliations

Science Signaling  22 Dec 2015:
Vol. 8, Issue 408, pp. ra131
DOI: 10.1126/scisignal.aab1901

Enhancing Ca2+ concentration at the pore

Store-operated calcium entry (SOCE) produces local calcium signals that not only refill intracellular calcium stores but also regulate specific downstream signaling events, such as activation of the calcium-dependent transcription factor NFAT. The channel complexes that mediate the calcium influx include the calcium-sensing proteins of the STIM family and the pore-forming subunits of the Orai family. These channels must function in cells that are part of tissues, as well as cells that circulate in the blood stream, thus cells that are exposed to very different concentrations of extracellular calcium. Using molecular dynamics simulations and analysis of mutant proteins in cells, Frischauf et al. identified a region, the calcium-accumulating region (CAR), in Orai1 that enhanced the local concentration of calcium at the entrance to the pore. The importance of CAR was most evident under conditions of low extracellular calcium, as would occur in cells of the skin. NFAT activity was impaired in cells expressing STIM1 and Orai channel proteins with mutations in CAR or that disrupted CAR function. Thus, CAR enables Orai to mediate SOCE-induced calcium signaling even under diverse extracellular calcium concentrations.


The Ca2+ release–activated Ca2+ channel mediates Ca2+ influx in a plethora of cell types, thereby controlling diverse cellular functions. The channel complex is composed of stromal interaction molecule 1 (STIM1), an endoplasmic reticulum Ca2+-sensing protein, and Orai1, a plasma membrane Ca2+ channel. Channels composed of STIM1 and Orai1 mediate Ca2+ influx even at low extracellular Ca2+ concentrations. We investigated whether the activity of Orai1 adapted to different environmental Ca2+ concentrations. We used homology modeling and molecular dynamics simulations to predict the presence of an extracellular Ca2+-accumulating region (CAR) at the pore entrance of Orai1. Furthermore, simulations of Orai1 proteins with mutations in CAR, along with live-cell experiments, or simulations and electrophysiological recordings of the channel with transient, electrostatic loop3 interacting with loop1 (the site of CAR) determined that CAR enhanced Ca2+ permeation most efficiently at low external Ca2+ concentrations. Consistent with these results, cells expressing Orai1 CAR mutants exhibited impaired gene expression stimulated by the Ca2+-activated transcription factor nuclear factor of activated T cells (NFAT). We propose that the Orai1 channel architecture with a close proximity of CAR to the selectivity filter, which enables Ca2+-selective ion permeation, enhances the local extracellular Ca2+ concentration to maintain Ca2+-dependent gene regulation even in environments with relatively low Ca2+concentrations.


The channel complex STIM/Orai, which is composed of a member of the family of intracellular calcium-sensing proteins called stromal interaction molecules (STIMs) and a member of the Orai1 family of calcium-conducting channels, provides a route of Ca2+ influx for physiological Ca2+ signaling in immune cells, as well as in various other tissues, such as skin and muscle (14). Understanding this Ca2+ entry pathway also has important pathophysiological implications in such diseases as autoimmunity, atherosclerosis, and cancer (57). The STIM/Orai channels function in multiple distinct environmental Ca2+ concentrations. Whereas Ca2+ concentrations range from 1 to 2 mM in the blood or lymph system, those in the basal epidermal layer are only 0.2 mM (8, 9). These distinct Ca2+ concentrations affect the driving force for Ca2+ influx. The amplitude, frequency, and duration of Ca2+ signals regulate the activation of specific transcription factors, including nuclear factor of activated T cells (NFAT) (10, 11). Thus, NFAT signaling depends on the extracellular Ca2+ concentration.

Structural insight into the Orai channel from Drosophila melanogaster depicts a hexameric assembly of Orai subunits arranged around a central ion pore (12). The first transmembrane (TM1) helix from each of the six subunits composes the funnel-structured pore that extends into the cytosol, and this pore is surrounded by TM2, TM3, and TM4. The pore-forming TM1 helices determine both gating and ion permeation (1318). Here, we investigated the properties of the region surrounding the pore entrance by homology modeling, molecular dynamics simulations, and functional live-cell experiments and identified a calcium-accumulating region (CAR) that enhances Ca2+ permeation under conditions of low extracellular Ca2+ concentration. Experiments with mutant proteins expressed in cells also expressing an NFAT-dependent reporter revealed that CAR contributed to store-operated Ca2+ entry (SOCE)–mediated transcription. Our results indicated that CAR, in the context of the narrow pore that is unique to Ca2+ channels of the Orai family, enabled highly Ca2+-selective influx necessary for NFAT-dependent gene transcription in mast cells and melanoma cells.


CAR in Orai1 is predicted to increase the local concentration of Ca2+ near the selectivity filter

To provide insight into Ca2+ sensing and permeation, we initially took advantage of the high sequence identity of the crystallized D. melanogaster Orai channel (12) of 63% to human Orai1 to obtain a three-dimensional (3D) homology model of human Orai1 (Fig. 1A). We used loop modeling to add the two extracellular loops and one intracellular loop that are unresolved in the Drosophila crystal structure. To test the stability of the human Orai1 model in a lipid bilayer and examine its dynamics, we performed 100-ns molecular dynamics simulations (fig. S1, A and B). Initially, the simulation included one Ca2+ ion placed in the selectivity filter, near Glu106, to stabilize the geometry of the selectivity filter during equilibration. Throughout the duration of the simulation, the hexameric channel maintained its secondary and tertiary structure and also maintained the structural symmetry of all six subunits (fig. S1A). When the simulations included 10 mM extracellular Ca2+, we observed transient Ca2+ binding, involving Asp110 and Asp112 in extracellular loop1, which are adjacent to the selectivity filter [Fig. 1, B and C (yellow balls), fig. S1C, and movie S1]. In addition, the simulations indicated that the pore entrance exhibited Na+ ion binding; however, this was rare, occurring with an occupancy of less than 2% (Fig. 1C, orange ball).

Fig. 1 Molecular dynamics simulations identify CAR in extracellular loop1 of human Orai1.

(A) Atomic 3D model of human Orai1 (E62-G297), including the loop segments that were not present in the Drosophila Orai crystal structure on which this human Orai1 model is based. The panel shows a side view of a modeled hexameric structure with each monomer individually colored. (B) Side view of a representative snapshot of a molecular dynamics simulation of the Orai1 pore showing Ca2+ binding (yellow balls) to the selectivity filter (Glu106 side chain shown) and the loop1 segments (Asp110 side chain shown). (C and E) Top view of a representative snapshot of a molecular dynamics simulation of Orai1 and Orai1-D110A simulation. (D) 1D density number of ion concentration through the Orai1 channel (black) and Orai1-D110A (red) from the intracellular to the extracellular side (in z direction). The dotted lines mark the membrane headgroup regions, and the peak between 7 and 8 nm corresponds to the selectivity filter.

Ion density calculations revealed two major ion density peaks: one was approximately at position 9 nm and corresponded to the extracellular loop1 segment, and the second one was present in the membrane, approximately at position 7.5 nm, which matched the position of the selectivity filter (Fig. 1D). Hence, when simulated with a 10 mM extracellular Ca2+ concentration, binding of Ca2+ close to the pore entrance increases the local Ca2+ up to 2.5 M within a 2-nm3 volume (Fig. 1C and fig. S1C; see Materials and Methods for calculations). We called this the “Ca2+-accumulating region” (CAR). On the basis of the structure, the simulations predicted that the CAR is about 1.2 nm from the selectivity filter (Fig. 1D), which is composed of the ring of the six Glu106 in each subunit, and is separated from the selectivity filter by a local energy barrier (19) that shows as the dip between the two peaks at 7.5 nm (selectivity filter) and 9 nm (CAR) in Fig. 1D.

We evaluated the importance of the Asp110 residue in coordinating extracellular Ca2+ by substituting this aspartate with alanine. Simulations of the Orai1-D110A mutant revealed a shift of the Ca2+ ion contacts from Asp110 to Asp112 and Asp114 (Fig. 1E). Hence, we observed an ~0.6-nm increase in the distance between the Ca2+ ions bound in CAR and in the selectivity filter, from a distance of 1.2 to 1.8 nm (Fig. 1D). Additionally, the presence of Na+ ions became an even less frequent event in the D110A mutant, occurring in less than 1% of the simulations.

Mutating Asp110 in CAR of Orai1 impairs store depletion–induced Ca2+ influx at low concentrations of extracellular Ca2+

To investigate the impact of CAR on Ca2+ permeation through Orai1, we compared Ca2+ currents in cells coexpressing STIM1 tagged with mCherry and either wild-type Orai1 or Orai1-D110A, both of which were tagged with enhanced yellow fluorescent protein (eYFP), in the presence of increasing extracellular Ca2+ concentrations. We performed whole-cell patch-clamp experiments in the coexpressing human embryonic kidney 293 cells, and we evoked SOCE currents by passive store depletion (20 mM EGTA in the pipette). Starting with 0.3 mM Ca2+ extracellular solution, we increased the extracellular Ca2+ concentration stepwise to 1 mM and then 10 mM. Whereas SOCE currents were low for cells expressing either wild-type Orai1 or Orai1-D110A in 0.3 mM extracellular Ca2+, 1 mM Ca2+ doubled the SOCE current, and 10 mM Ca2+ produced a fivefold increase in cells expressing Orai1 compared with the currents recorded in 0.3 mM Ca2+ (Fig. 2A). Comparatively, in cells coexpressing STIM1 and Orai1-D110A, 1 mM Ca2+ did not increase SOCE current from that detected in 0.3 mM Ca2+, but 10 mM Ca2+ resulted in maximum SOCE currents that were similar to those observed in the cells expressing Orai1 (Fig. 2A).

Fig. 2 CAR promotes Ca2+ permeation through the Orai1 channel.

(A to C) Whole-cell patch-clamp experiments show time course of currents mediated by mCherry-tagged STIM1 coexpressed with wild-type (WT) or mutant eYFP-tagged Orai1 as indicated in human embryonic kidney 293 cells (n = 9 to 10). Currents were only measured for cells positive for mCherry-tagged STIM1 and WT or mutant eYFP-tagged Orai1. Current activation by endoplasmic reticulum store depletion was mediated by 20 mM EGTA in the patch pipette, and stepwise current increases were recorded at 0.3, 1, and 10 mM Ca2+ concentration with Na+-containing (A and C) or Na+-free (B) solution. (A and B) Representative current-voltage relationship with properties of Ca2+-selective currents are shown for WT Orai1 and Orai1-D110A. (B) Whole-cell patch-clamp experiments show time course of currents mediated by mCherry-tagged STIM1 coexpressed with WT or mutant eYFP-tagged Orai1 as indicated in human embryonic kidney 293 cells (n = 7 to 10). Store depletion was achieved, and currents were recorded as in (A) with increasing Ca2+ concentrations in a Na+-free solution. Orai1 and Orai1-D110A maximum currents at various extracellular Ca2+ concentrations were compared for statistical significance by t test. (A) In a Na+-containing solution, currents are significantly different (P < 0.05) in a 1 mM Ca2+ solution. (B) In a Na+-free extracellular solution, currents were significantly different (P < 0.05) in 0.3, 0.5, 1, and 2 mM Ca2+ solutions. (C) Similar time course for indicated mutants as in (A) and (B). Currents of Orai1-D112A or Orai1-D114A were compared by t test for significance and are not significantly different to those of WT Orai1.

Analysis of the current-voltage profiles showed that the wild-type channel exhibited the typical inward-rectifying current-voltage profile and similar high reversal potentials at 1 and 10 mM Ca2+ solutions (Fig. 2A). On the contrary, the profile for wild-type Orai1 and Orai1-D110A channels obtained with 0.3 mM Ca2+ solution were atypical for SOCE, exhibiting a flat current-voltage profile at negative potentials (Fig. 2A). Thus, although we performed current-voltage analysis from currents obtained from cells expressing either wild-type Orai1 or Orai1-D110A (Fig. 2A), we repeated the current analysis in a Na+-free environment [substituted by impermeable tetraethylammonium (TEA+)] to evaluate only Ca2+ permeation at low extracellular Ca2+ concentrations, because in the absence of Ca2+ and other divalent ions, Orai channels become permeable to monovalent cations (20, 21).

In the Na+-free solutions, upon STIM1 activation by store depletion, Orai1 exhibited Ca2+ influx in the presence of 0.3 mM extracellular Ca2+ solution and exhibited stepwise increases in current with increasing concentrations of extracellular Ca2+ (Fig. 2B). In contrast, Orai1-D110A currents were undetectable at the lowest Ca2+ concentration, compared to those obtained with wild-type Orai1 channels, were reduced in the presence of 1 and 2 mM extracellular Ca2+, and were similar in the presence of 10 mM extracellular Ca2+ (Fig. 2B). Current-voltage analysis showed that both channels exhibited inward-rectifying profiles with similar high reversal potentials (Vrev, >70 mV), but the Orai1-D110A channels were less responsive at low extracellular concentrations of Ca2+ (Fig. 2B). Hence, the absence of the negative charge of Asp110 in CAR reduced Ca2+ permeation through the Orai1 channel; only nonphysiological, artificially high 10 mM Ca2+ concentrations bypassed the loss of CAR.

We performed similar analysis with cells expressing STIM1 and with either the Orai1-D112A or Orai1-D114A mutants. The Orai1-D112A mutant produced slightly smaller currents at 1 and 10mM extracellular Ca2+ than wild-type Orai1 (Fig. 2C). The Orai1-D114A mutant produced currents with a high amount of variability, but the Orai1-D114A currents were slightly, but not significantly, greater than the currents produced by the wild-type Orai1 channel at 1 and 10 mM extracellular Ca2+ (Fig. 2C).

Mutating Glu84 in the putative CAR of Orai2 impairs SOCE currents

Comparison of the primary amino acid sequences of human Orai isoforms showed that not all of the negative residues of CAR are conserved between these isoforms; Orai2 only contains one charged residue (Orai2-Glu84, analogous to Orai1-Asp110) in its extracellular loop1, and Orai3 contains glutamates and aspartates in CAR. We coexpressed mCherry-tagged STIM1 and eYFP-tagged Orai2 in human embryonic kidney 293 cells and observed SOCE currents that increased with stepwise increases in extracellular Ca2+ (Fig. 3A) and that were similar to those recorded from cells coexpressing mCherry-STIM1 and YFP-Orai1 (Fig. 2A). Instead of creating an E84A mutant in Orai2, we mutated Glu84 to glutamine in Orai2 to retain similar side chains yet lacking its negative charge. SOCE currents in cells coexpressing Orai2-E84Q and STIM1 were significantly reduced in the presence of 1 and 10 mM extracellular Ca2+ in comparison to currents obtained with cells coexpressing wild-type Orai2 and STIM1. Although nonphysiological, we examined currents produced when all extracellular cations were substituted by Ca2+ (110 mM) to achieve maximum extracellular Ca2+ levels. Orai2-E84Q still yielded significantly reduced currents (Fig. 3A). Current-voltage traces from the cells expressing Orai2 (Fig. 3B) or Orai2-E84Q (Fig. 3C) with STIM1 showed that the channels exhibited high Ca2+ selectivity (Vrev, >70 mV); hence, residue Glu84 in CAR of Orai2 enhanced Ca2+ permeation without affecting the selectivity filter.

Fig. 3 CAR promotes Ca2+ permeation through the Orai2 channel.

(A) Whole-cell patch-clamp experiments show time course of currents mediated by mCherry-tagged STIM1 coexpressed with WT or mutant eYFP-tagged Orai2 as indicated in human embryonic kidney 293 cells exposed to 20 mM EGTA in the patch pipette and then stepwise increase in Ca2+ concentration with Na+-containing solution (n = 8 to 9). WT Orai2 and mutant Orai2 were analyzed by t test for statistical significance for their maximum currents at various extracellular Ca2+ concentrations. Their currents are significantly different (P < 0.05) in 1, 10, and 110 mM Ca2+ solutions. (B and C) Representative current-voltage relationship of Orai2- or Orai2-E84Q–mediated SOCE currents for experiments shown in (A).

To confirm that the differences we observed in the SOCE currents were not the result of differences in the abundance of the expressed proteins, we determined the mean fluorescence intensities of each Orai construct. The eYFP-tagged wild-type Orai1 constructs, the eYFP-tagged wild-type Orai2 constructs, and the eYFP-tagged mutants, as well as coexpressed mCherry-tagged STIM1, produced similar fluorescence intensities, indicating similar amounts of the proteins (fig. S1, D and E) as well as similar plasma membrane localization (fig. S1F).

Orai1 CAR maintains Ca2+-dependent gene regulation in various cell systems

To investigate the functional importance of CAR for SOCE-mediated responses, we assessed the role of CAR in Orai1 in Ca2+-dependent gene transcription. The transcription factor NFAT requires sustained cytosolic Ca2+ concentrations to trigger expression of several immune response genes, including those encoding cytokines and chemokines (22). Hence, we monitored SOCE in human embryonic kidney 293 cells expressing mCherry-tagged STIM1 together with either eYFP-tagged Orai1 or eYFP-tagged Orai1-D110A by imaging changes in the Ca2+-sensitive dye Fura-2. We initiated depletion of Ca2+ from the endoplasmic reticulum with the SERCA (sarcoplasmic and endoplasmic reticulum Ca2+ adenosine triphosphatase) inhibitor thapsigargin, which resulted in a similar transient increase in cytosolic Ca2+ in the cells expressing STIM1 with either Orai1 or Orai1-D110A (Fig. 4A). Addition of extracellular 0.3 mM Ca2+ (Fig. 4A), 0.5 mM Ca2+ (fig. S2A), or 1 mM Ca2+ (fig. S2B) resulted in a sustained increase in cytosolic Ca2+ that was significantly higher in cells expressing Orai1 than in those expressing Orai1-D110A (fig. S2C). Mock-transfected cells lacked an SOCE peak at 0.3 mM Ca2+ (Fig. 4A).

Fig. 4 Activation of the Orai1 CAR mutant results in decreased SOCE-induced cytosolic Ca2+ concentrations and NFAT signaling.

(A) Time course of cytosolic Ca2+ concentration measured by Fura-2 microscopy for human embryonic kidney 293 cells coexpressing mCherry-tagged STIM1 and eYFP-tagged WT or mutant Orai1, mock-transfected cells, or unstimulated cells that were not exposed to thapsigargin (TG). In Ca2+-free extracellular solution, endoplasmic reticulum stores were depleted with thapsigargin at 3 min, and 0.3 mM Ca2+ was added at 12 min (n = 12 to 25). STIM + Orai1 data were compared to STIM1 + Orai-D110A at 15 min by t test and determined significantly different (P < 0.05) upon addition of extracellular Ca2+. (B) Representative images of GFP-NFAT localization in mock-transfected human embryonic kidney 293 cells or human embryonic kidney 293 cells coexpressing mCherry-tagged STIM1 and the indicated eYFP-tagged Orai1 before (upper panel) or 30 min after exposure to 1 μM thapsigargin (lower panel) in a 0.3 mM Ca2+−containing bath solution. (C) Time course showing the ratio of nucleus to cytosolic GFP-NFAT fluorescence intensity for cells coexpressing GFP-NFAT with the indicated transfected proteins. Endoplasmic reticulum store depletion was induced by 1 μM thapsigargin at 5 min in a Ca2+-free solution, and 0.3 mM Ca2+ was added at 10 min (n = 5 to 12). The ratios for NFAT + STIM1 + Orai1 were compared to those for NFAT + STIM1 + Orai1-D110A using a t test at 30 min and determined significantly different (P < 0.05) in a 0.3 mM Ca2+ solution. (D) Quantitative analysis and representative images of activation of an NFAT-controlled reporter gene (NFAT reporter) in rat basophilic leukemia (RBL) mast cells expressing red fluorescent protein (RFP) under the control of an NFAT-regulated promoter, CFP-tagged STIM1, and eYFP-tagged WT or mutant Orai1 that were exposed to 100 nM thapsigargin for 3.5 hours in 0.3 mM Ca2+− or 1.8 mM Ca2+−containing medium. Representative images are shown on the left, the percent of cells positive for RFP fluorescence are shown in the middle (n = 34 to 86 cells), and the intensity of RFP fluorescence is shown on the right (n = 34 to 86 cells). Data were analyzed by t test for statistical significance (P < 0.05) as indicated by the stars. (E) Representative human embryonic kidney 293 cells show CFP-tagged STIM1 cluster formation with eYFP-tagged Orai1 or eYFP-tagged Orai1-D110A upon store depletion with 1 μM thapsigargin and presence of 2 mM Ca2+ solution. R-factor was used as a measure of the linear correlation between STIM1 and Orai1, as well as STIM1 and Orai1-D110A before and after store depletion by thapsigargin (n = 28 to 39). (F) The NFAT reporter gene, cyan fluorescent protein (CFP)–tagged STIM1, and eYFP-tagged Orai1 or eYFP-tagged Orai1-D110A coexpressed in WM3734 melanoma cells were treated with 100 nM thapsigargin for 1 hour in a 0.4 mM Ca2+–containing medium. Intensity of NFAT-driven RFP expression was determined in those cells that exhibited STIM1 and Orai1 or Orai1-D110A expression 24 hours after thapsigargin treatment. Data were analyzed by t test for statistical significance (P < 0.05) and determined that Orai1-D110A intensity is significantly decreased compared to WT Orai1. a.u., arbitrary unit.

We assessed the activation of green fluorescent protein (GFP)–tagged NFAT by its relocation from the cytosol into the nucleus (23) in human embryonic kidney 293 cells coexpressing mCherry-STIM1 and eYFP-Orai1. Within the first 5 min after addition of thapsigargin, during store depletion, NFAT remained in the cytosol. Subsequent addition of 0.3 mM Ca2+ stimulated the relocation of NFAT into the nucleus (Fig. 4, B and C). Cells coexpressing STIM1 and Orai1-D110A exhibited reduced NFAT translocation in response to store depletion followed by the addition of 0.3 mM Ca2, and NFAT translocation did not occur in mock-transfected cells exposed to thapsigargin followed by the addition of 0.3 mM Ca2+ (Fig. 4, B and C).

To monitor the activity of endogenous NFAT, we expressed an NFAT-responsive RFP construct (NFAT reporter) in which the fluorophore is controlled by a cytomegalovirus promoter and tandem repeats of the NFAT consensus binding site (24) together with mCherry-STIM1 and eYFP-Orai1 or eYFP–Orai1-D110A in RBL mast cells. These cells were subjected to 100 nM thapsigargin in either 0.3 or 1.8 mM extracellular Ca2+ for 3.5 hours, and then the number of RFP-positive cells was monitored, as well as the abundance of RFP as indicated by the intensity of the signal. About 60 to 70% of the STIM1- and Orai1-positive cells exhibited RFP signal in response to store depletion followed by addition of medium containing 0.3 or 1.8 mM Ca2+ (Fig. 4D). Although the percent of RFP-positive cells were similar at both extracellular Ca2+ concentrations (Fig. 4D), RFP intensity increased in 1.8 mM extracellular Ca2+ (Fig. 4D). In contrast, only 20% of the cells cotransfected with STIM1 and Orai1-D110A exhibited RFP fluorescence, and this was unchanged by store depletion followed by addition of 0.3 or 1.8 mM Ca2+ (Fig. 4D). Coexpression of STIM1 and Orai1 in store-depleted human embryonic kidney 293 cells exposed to 0.3 mM extracellular Ca2+ or coexpression of STIM1 and Orai1-D110A in store-depleted human embryonic kidney 293 cells exposed to 2 mM Ca2+ resulted in similar Ca2+ signals (Fig. 2B). Furthermore, both Orai1 and Orai1-D110A formed clusters with STIM1 (Fig. 4E), whereas only coexpression of Orai1 and STIM1 mediated NFAT-driven RFP expression.

To bypass the requirement for CAR in NFAT signaling that was stimulated by STIM1-Orai1– or STIM1–Orai1-D110A–mediated SOCE, we repeated the experiment in a medium containing 10 mM Ca2+. Here, a similar percentage of RBL cells expressing STIM1 with Orai1 or Orai1-D110A exhibited NFAT-driven production of RFP (fig. S2D). As additional control experiments, we exposed the cells to 10 μM ionomycin to increase cytosolic Ca2+ concentration through direct Ca2+ transport through the ionophore (25). The percentage of cells with NFAT-stimulated RFP production were similar for cells expressing either STIM1 with Orai1 or with Orai1-D110A (fig. S2D).

As cells in the circulation, mast cells are exposed to relatively high external Ca2+ concentrations (1 to 2 mM). However, STIM/Orai channels have important roles in melanocytes and melanoma cells, which reside in the basal epidermal layer where the external Ca2+ is much lower (0.2 to 0.4 mM) (8, 9). Hence, to test the “universality” of Orai1 CAR, we evaluated NFAT-driven expression of RFP, using the NFAT reporter upon store depletion in melanoma cells also transfected to express mCherry-STIM1 and either eYFP-Orai1 or eYFP–Orai1-D110A and growing in 0.4 mM Ca2+-containing medium. NFAT-driven RFP expression in Orai1-D110A–overexpressing melanoma cells was significantly less than that in the Orai1-expressing cells (Fig. 4F). These experiments indicated that without the CAR in Orai1, SOCE-induced NFAT signaling is compromised in cells that are exposed to either relatively low or high physiological concentrations of Ca2+.

Basic residues in extracellular loop3 interact with Orai1 CAR

The loop3 segment exhibited the highest fluctuations in the overall Orai1 structure (fig. S1B). Molecular dynamics simulations of Orai1 predicted that the aspartates in loop1 not only bound Ca2+ but also formed transient electrostatic interactions with four basic residues (Lys203, Lys204, Arg210, and Lys214) in the flexible loop3 that connects TM3 and TM4. Specifically, residue Arg210 in loop3 transiently coupled with Asp112, the middle aspartate in loop1. The molecular dynamics simulations revealed intra- and intermonomer interactions (0.5 interactions per Orai1 channel on average; Fig. 5A), demonstrating that even in the relatively short simulation time (at about the last 50 ns of a 100-ns simulation), the system sampled conformations in which such contacts are possible.

Fig. 5 Loop3 residues form electrostatic interactions with CAR in Orai1.

(A) Representative snapshot of the intermolecular (left) and intramolecular (right) electrostatic interaction of Arg210 with Asp112 predicted by molecular dynamics simulation. Potential Asp112-Arg210 contacts were counted on the basis of a distance of ≤4.5 Å between the carboxyl carbon of loop1 aspartic acid and the guanidino carbon of loop3 arginine as shown in the time courses (left inset graph for intermolecular interaction and right inset graph for intramolecular interaction). The time-dependent number of intra- and intermolecular contacts between Asp112 in loop1 and Arg210 in loop3 for a single Orai1 channel within 100 ns is shown in the central inset. (B) Selected single cysteine mutants in Orai1 loop1 (L109C, D110C, A111C, D112C, H113C, D114C, P117C, and L110C) are shown as sticks in a 3D homology model of Orai1. (C) Percentage of dimerization for cysteine mutants upon Cu-phenanthroline (CuP) treatment was calculated. Data are shown as the averages + SEM (n = 4 to 8). (D) Structural modeling of the loop3 domain in Orai1 yielded a random coil region, highlighting the residues (P201, L202, K203, K204, R210, P211, K214, P216, S218, A221, S225, T230, P231, I237, and T240), which were individually engineered to cysteines. (E) Percentage of dimerization for cysteine mutants upon CuP treatment was calculated. Data are shown as the averages + SEM (n = 4 to 8).

To experimentally evaluate the electrostatic loop1 and loop3 interactions, we used a disulfide cross-linking approach. We substituted the residues that were observed as interacting in the simulations with cysteines and measured disulfide bridge formation between two Orai1 subunits. An interaction would produce a dimeric band (50 kD) on Western blots, whereas cysteines that failed to cross-link would result in the appearance of monomers (25 kD). We individually mutated residues in loop1 (L109C to L119C) (Fig. 5B) and assessed intermolecular interactions between analogous positions within an Orai1 channel complex in a cysteine-free background. The highest proportion of cross-linking occurred when the cysteine-substituted residues were closer to the pore-forming TM1 helix (D110C and A111C, 70 to 80% dimer), in comparison to cysteine-substituted residues in the middle or distal segment (D112C, D114C, Y115C, and P117C, 30 to 50% dimer; L119C, <20% dimer) (Fig. 5C). Cross-linking of cysteines was reversible by addition of the reducing agent bis(2-mercaptoethyl)sulfone (BMS) (fig. S3A). In molecular dynamics simulations, we selected a specific loop1 residue in all six subunits of the Orai1 channel and measured their distances over 100 ns to predict the potential to cross-link. Consistent with these biochemical experiments, molecular dynamics simulations revealed close time-dependent distances between loop1 residues next to TM1 (fig. S3B).

Similarly, we individually mutated the 15 consecutive residues along loop3 of Orai1 to cysteines (Fig. 5D) and analyzed their propensity to dimerize in cross-linking experiments (fig. S4A). These mutants exhibited a bell-shaped dimerization profile (Fig. 5E), indicating that residues in the middle of loop3 (Lys214 to Ser225) preferentially interacted with other loop3 subunits, compared with the amino acids closer to the TM3 or TM4 helices. Consistently, the residues in the middle of loop3 showed largest flexibility in molecular dynamics simulations (fig. S4B).

Next, we tested for the simulated loop1/loop3 interaction between Asp112 in loop1 and Arg210 in loop3 by creating a cysteine double mutant (Orai1–D112C-R210C) and assessing its ability to form disulfide-bridged oligomers. We observed two bands in Western blots: one predominant band at 125 kD, corresponding to a pentamer, and a second at 25 kD, corresponding to a monomer (Fig. 6A and fig. S4C). These data indicated efficient coupling of the Asp112 and Arg210 positions between different Orai subunits. We also examined if the architecture of the Orai1 channel favored the interaction between D112C and R210C rather than the interaction between R210C in loop3 with residues adjacent to D112C in loop1 (Orai1–A111C-R210C and Orai1–H113C-R210C; fig. S4C) or the interaction between D112C in loop1 with the residue adjacent to R210C in loop3 (Orai1–D112C-A221C; Fig. 6A). Only the Orai1–D112C-R210C double mutant produced hexamers, the other double cysteine mutants yielded mainly monomers and dimers (Fig. 6A and fig. S4A). Hence, these cross-linking experiments revealed a preferential geometry for heteromeric interaction between Asp112 and Arg210.

Fig. 6 Disruption of CAR through forced dimerization between loop1 and loop3 inhibits SOCE.

(A) Oligomerization of the indicated Orai1 single and double cysteine mutants overexpressed in human embryonic kidney 293 cells was detected by SDS–polyacrylamide gel electrophoresis (SDS-PAGE) (12% left and 8% right) after incubation with 1 mM CuP (upper panel) or after the addition of 5 mM BMS (lower panel). (B) Whole-cell patch-clamp experiments show time course of currents mediated by Cherry-tagged STIM1 coexpressed with WT eYFP-tagged Orai1 or Orai1 mutant as indicated in human embryonic kidney 293 cells exposed to 20 mM EGTA in the patch pipette and a 10 mM Ca2+−containing solution, and upon maximum current activation, BMS (5 mM) was added (n = 8 to 11). Analysis by t test, with P < 0.05 for statistical significance, indicated that Orai1-D112C maximum currents are significantly different from those of Orai1–D112C-R210C in the absence but not in the presence of BMS. (C) Current-voltage relationship of the store-operated activation of Orai1–D112C-R210C and upon BMS stimulation from a representative experiment from (B). (D) BMS-dependent increase in currents mediated by WT eYFP-tagged Orai1 and the indicated eYFP-tagged loop3 cysteine mutants upon maximum store-dependent activation. All Orai1 mutants, except P201C, yielded a store-dependent current when coexpressed with STIM1 in human embryonic kidney 293 cells exposed to 20 mM EGTA in the patch pipette and a 10 mM Ca2+−containing solution. Data are shown as the means + SEM. (E) BMS-dependent increase in currents mediated by WT eYFP-tagged Orai1 and the indicated YFP-tagged loop1 cysteine mutants upon maximum store-dependent activation under the same conditions as in (D). (F) Whole-cell patch-clamp experiments show time course of currents mediated by mCherry-tagged STIM1 coexpressed with WT eYFP-tagged Orai1 or Orai1 mutant in a 1 mM Ca2+−containing bath solution (n = 7 to 11 cells). Maximum currents of Orai1-D112C and Orai1–D112C-R210C were analyzed by t test before and after addition of BMS for statistical significance and are significantly different (P < 0.05) before addition of BMS. (G) Comparison of relative BMS-dependent stimulation in currents mediated by mCherry-tagged STIM1 and eYFP-tagged Orai1–D112C-R210C coexpressed in human embryonic kidney 293 cells in the presence of the indicated extracellular solutions (n = 6 to 11). Data were analyzed by t test for statistical significance (P < 0.05) of maximum currents upon BMS treatment, determining that 1 and 10 mM Ca2+ currents are significantly different compared to sodium-based currents. Na-DVF, Na+-based divalent-free solution.

Loop3 interaction competes with Ca2+ binding in the Orai1 CAR

This potential loop3/loop1 coupling within human Orai1 might affect CAR by competing with Ca2+ binding and thus Ca2+ permeation. Even cells that were not exposed to the cross-linking reagent CuP exhibited efficient cross-linking of the Orai1–D112C-R210C double mutant (fig. S4D), which would force loop3 into a conformation that moves loop3 close to the pore entrance. We monitored SOCE, induced by passive store depletion with 20 mM EGTA in 10 mM Ca2+–containing medium, in human embryonic kidney 293 cells expressing mCherry-STIM1 with eYFP–Orai1–D112C-R210C, eYFP–Orai1-D112C, or eYFP–Orai1-R210C. Store-dependent currents of cross-linked Orai1–D112C-R210C were significantly reduced in comparison to those mediated by STIM1 and Orai1 (Fig. 6B). Breaking the disulfide bonds with BMS resulted in a 300% increase in the Orai1–D112C-R210C–mediated currents (Fig. 6, B and C), which were similar to maximum currents obtained with cells expressing Orai1-D112C and STIM1 and exceeding those obtained with cells expressing Orai1 and STIM1 (Fig. 6B). In analogous experiments, none of the loop3 cysteine mutants (each of which produced ≤40% increase in average current after BMS treatment) (Fig. 6D and fig. S5A) or the single loop1 (each of which produced ≤20% increase in current after BMS treatment) (Fig. 6E) or the adjacent double cysteine mutants (Orai1–A111C-R210C and Orai1–H113C-R210C, which produced ≤10% increase in current after BMS treatment) (fig. S5B) exhibited such a marked BMS-dependent current increase. Hence, the forced D112C to R210C interaction had the greatest effect on Ca2+ permeation.

To investigate the competitive Ca2+ and loop3 interaction with Orai1 CAR, we tested the BMS-dependent increase in Orai1–D112C-R210C currents in different concentrations of extracellular Ca2+. In a 1 mM Ca2+–containing solution, BMS increased Orai1–D112C-R210C currents by 400% (Fig. 6, F and G), and in a 10 mM Ca2+–containing solution, BMS increased Orai1–D112C-R210C currents by 300% (Fig. 6G), whereas currents only increased by 100% when the cells were exposed to BMS in the presence of sodium-based extracellular solution (Fig. 6G). The 100% increase by BMS in a sodium-based solution indicated that loop3 binding to residues in the CAR of loop1 has a steric effect on Orai1 Ca2+ permeation, and the additional 300% in a 1 mM Ca2+–containing solution indicated that loop3 binding to CAR has a Ca2+-dependent effect on Orai1 permeation. We speculate that an enhanced Asp112-Arg210 interaction might affect the orientation or flexibility of the Asp110 side chain and hence the binding of Ca2+ ions to CAR.

Statistical analysis of interactions in molecular dynamics simulations of human Orai1 predicted that Asp110 rarely made interactions with other residues, thus would rarely participate in the loop3 interaction (fig. S6A), and frequently interacted with Ca2+ or Na+ (fig. S6B). The simulations predicted that Asp112 did not have a clear preference, making contacts to the basic residues in loop3 as well as to cations (fig. S6, A and B). On the contrary, the simulations predicted that Asp114 nearly exclusively contacted positively charged residues of loop3 (fig. S6A) and made almost no contact with Ca2+ or Na+ (fig. S6B). Specifically, Asp114 interactions were predicted to occur with Lys203, Lys204, and Lys214 (fig. S6C). In the simulations, the Asp114-Lys214 interaction (0.5 interactions on average per Orai1 channel) was only observed within the same Orai1 subunit (fig. S6C). Consistent with the simulations, intramolecular cross-linking of D114C-K214C interfered with Orai1-K214C dimerization (fig. S6D). This interloop interaction, however, did not affect Orai1–D114C-K214C–mediated SOCE currents monitored in the presence of 10 mM extracellular Ca2+ (fig. S6E). Thus, these data indicate that the loop3 interaction with Asp112 but not Asp114 regulates Ca2+ permeation of Orai1.

We attempted to form an Orai1 channel with an even more efficient CAR by mutating both Arg210 and Lys214 to alanines to restrict the competitive loop3 binding with Ca2+ in the CAR. Indeed, compared with the simulations of wild-type Orai1 (Fig. 1C), simulations of an Orai1–R210A-K214A mutant channel exhibited additional bound Ca2+ ions to Asp112 and Asp114 (Fig. 7A) and a broadened CAR peak in the horizontal line scan (Fig. 7B). This additional CAR peak was not observed for single Orai1-R210A and Orai1-K214A mutations (Fig. 7B). However, for Orai1-R210A, Ca2+ was more frequently present between the selectivity filter and CAR (Fig. 7B) where it might facilitate Ca2+ movement into the channel. When expressed as fusion proteins (mCherry for STIM1 and eYFP for the Orai1 constructs) in human embryonic kidney 293 cells, store-operated currents were significantly increased for STIM1 and Orai1–R210A-K214A or STIM1 and Orai1-R210A in comparison to the currents detected for STIM1 and wild-type Orai1 in 0.3 mM extracellular Ca2+ (Fig. 7C). In both Orai1 loop3 mutants, a stepwise increase to 1 mM Ca2+ enhanced permeation (significantly for Orai1–R210A-K214A), whereas at 10 mM extracellular Ca2+, the wild-type Orai1 channels and the channels with the Orai1 loop3 mutants reached a similar maximum value (Fig. 7C). These experiments revealed that basic loop3 residues can compete with Ca2+ for similar binding sites at the extracellular CAR and thereby limit Ca2+ permeation.

Fig. 7 Ca2+ and loop3 compete for binding to CAR.

(A) Top view of a representative snapshot of the molecular dynamics simulation of Orai1–R210A-K214A. Ca2+ ions are represented as yellow balls and Na+ as orange balls. (B) 1D density number of ion concentration through the Orai1 channel (black) and the double mutant (left) or the single mutants (right) from the intracellular to the extracellular side (in z direction). Dotted lines mark the membrane headgroup regions, and the peak between 7 and 8 nm corresponds to the selectivity filter. (C) Whole-cell patch-clamp experiments show time course of currents mediated by mCherry-tagged STIM1 and YFP-tagged WT or mutant Orai1 expressed in human embryonic kidney 293 cells exposed to 20 mM EGTA in the patch pipette and then exposed to the indicated Ca2+ solutions (n = 10 to 14). Maximum currents were analyzed by t test for statistical significance; Orai1 and Orai1–R210A-K214A are significantly different (P < 0.05) in 0.3 and 1 mM Ca2+ solutions. Orai1 and Orai1-R210A maximum currents are significantly different in a 0.3 mM Ca2+ solution.


Our results identified a previously unknown region, CAR, that enhances Ca2+ permeation by promoting the accumulation of Ca2+ at the pore entrance of the human Orai1 channel. CAR is formed by aspartates that dynamically bind Ca2+ ions. This extracellular Ca2+-binding domain was predicted to increase the local Ca2+ concentration at the outer channel mouth, for example, from 10 mM to 2.5 M, and thereby enhance the driving force for Ca2+ permeation. CAR is positioned only ~1.2 nm from the selectivity filter. Mutation of CAR residue Asp110 increased the distance between these two Ca2+-binding structures to ~1.8 nm and suppressed Ca2+ permeation at physiological extracellular Ca2+ concentrations. Hence, our data indicated that the Ca2+ permeation pathway of Orai channels requires the enhanced local Ca2+ concentration generated by CAR to induce Ca2+ passage through the narrowest part of the pore. Such a Ca2+-binding structure has not been identified in other highly Ca2+-selective plasma membrane channels, including voltage-gated Ca2+ channels and transient receptor potential channels (2628). In comparison to voltage-gated L-type channels, which exhibit a single-channel conductance of 2.6 pS (29), Orai1 and Ca2+ release–activated Ca2+ (CRAC) channels containing Orai1 have a much lower single-channel conductance that is 8 to 9 fS (14, 30). Hence, for Orai1 channels, the cytosolic Ca2+ concentrations only achieve micromolar Ca2+ concentrations within a few nanometers from the pore, thereby creating local Ca2+ microdomains (31). Orai mutants lacking CAR would diminish these functional Ca2+ microdomains that are critical for effective and selective downstream signaling. Thus, Orai1 CAR represents a channel-intrinsic mechanism to drive local Ca2+ signaling.

Two high-resolution structures of the ryanodine receptor suggested that luminal loops close to the selectivity filter could attract Ca2+ for permeation and may partially account for Ca2+ release in response to store overload (32, 33). Similar to CAR in Orai1, these luminal loops in the ryanodine receptor may enhance Ca2+ influx.

The aspartate residues that form CAR have been reported to contribute to Ca2+ selectivity because double or triple aspartate mutations in Orai1 lead to channels that conduct nonselective cation currents (16, 34). However, single Orai1 aspartate mutations yield Ca2+-selective currents [(17, 35) and the current work]. Here, an engineered Orai2 that lacked all negative side chains within CAR still retained Ca2+ selectivity yet exhibited substantially reduced Ca2+ currents. Hence, this Orai2 mutant functioned in a mode in which Ca2+ selectivity was uncoupled from CAR.

CAR interactions with the outer loop3, mediated by Asp112 (loop1) and Arg210 (loop3) residues, suppressed Ca2+ permeation in a Ca2+-dependent, as well as a steric, manner. Consistent with this effect of the interaction of loop3 with CAR, mutations that prevented the loop1 and loop3 interaction or the presence of a reducing agent for channels that breaks engineered cross-linked residues resulted in channels that exhibited enhanced Ca2+ permeation. Neither the basic loop3 residues nor the number of CAR residues is conserved among the human Orai family, suggesting that the differences in the sequence of the pore entrance may fine-tune Orai isoform-specific Ca2+ permeation.

The enhanced Ca2+ concentrations generated by CAR have important physiological consequences, particularly at a low environmental Ca2+. To translocate to the nucleus and initiate gene transcription, the Ca2+-dependent transcription factor NFAT requires sustained Ca2+ signals (36). At an extracellular 2 mM Ca2+, currents of an Orai1-D110A CAR mutant were reduced twofold and exhibited similar currents as those of wild-type Orai1 at 0.3 mM Ca2+. Despite these similar global Ca2+ signals, only wild-type Orai1 triggered NFAT-mediated gene expression in mast cells. Local Ca2+ microdomains stimulate consistent NFAT signaling because even a similar global increase in Ca2+ concentration can result in divergent NFAT signaling (23, 37). One predominant factor is the formation of Orai1 clusters (37). Our results revealed that CAR determines the Ca2+ driving force and thus Ca2+ microdomain signaling as indicated by the impaired NFAT response of cells expressing STIM1 and Orai1-D110A. Consequently, cooperativity of diminished Ca2+ microdomains of Orai1-D110A Ca2+ channels might affect NFAT signaling in a manner similar to that observed with conditions that abolished cluster formation by Orai1 channels (37). In addition, we found that melanoma cells required CAR to enable NFAT signaling at physiologically low 0.4 mM Ca2+ concentrations. Hence, our data showed that the Orai1 CAR contributes to the formation of functional Ca2+ microdomains that are strictly required for NFAT signaling (38). The data presented here show that the Orai channel architecture with a close distance between CAR and the Ca2+ selectivity filter enables Ca2+ signaling even when environmental Ca2+ is low, as in the basal epidermal layer, thereby explaining a ubiquitous cellular Ca2+ entry route.


3D model of human Orai1

The published D. melanogaster Orai1 crystal structure [Protein Data Bank (PDB) ID, 4HKR] was used to construct a full atomistic model of human Orai1. Two extracellular loops and one intracellular loop are unresolved in the Drosophila crystal structure and were modeled by retrieving loop conformations bridging two sets of anchor residues from the PDB. The sequence identity is 63% between human and D. melanogaster (78% sequence similarity) within the aligned region; therefore, homology modeling can produce a reasonable 3D model with an estimated resolution of ~2 Å. Homology modeling was performed in YASARA (39), using the standard macro hm_build.mcr with the FixModelRes option to constrain conserved residues. The final model has an overall quality z score of −1.931 as given by YASARA, 96.1% of the residues in the most favored regions of the Ramachandran plot and a G-factor of 0.17 as calculated by PROCHECK (40).

Molecular dynamics simulations

The human Orai1 model was inserted into a preequilibrated palmitoyloleoylphosphatidylcholine (POPC) bilayer consisting of 512 lipid molecules using the InflateGRO method (41). Copies of the model were modified by introducing point mutations in all six monomers using YASARA. The protonation state of histidine residues was predicted in WHATIF (42). Simulations were performed with the GROMACS 4.6.1/4.6.3 software (43, 44). POPC molecules were described by Berger parameters for lipids (45) converted into the format of the OPLS (optimized potentials for liquid simulations) all-atom force field (46), after the procedure proposed by Neale ( The protein-lipid system was solvated with water molecules described by the simple point charge model of water (46), and counterions were added to achieve electric neutrality. Additionally, calcium, sodium, and chloride ions were added to a final concentration of 10 mM CaCl2 and 8 mM NaCl. Molecular dynamics simulations were carried out in the isothermal-isobaric (NPT) ensemble using a 2-fs time step. Periodic boundary conditions were used. Initial velocities were assigned by applying a Maxwell distribution at 310 K. Lennard-Jones and electrostatic interactions were cut off at a distance of 10.0 Å, and the long-range electrostatic interactions were computed using the particle mesh Ewald method (47). The temperature was kept at 310 K using the velocity rescale thermostat, and the pressure was kept constant at 1 bar by weak coupling (T = 2.0 ps) to a pressure bath using the Parrinello-Rahman algorithm (48), which was used with a semi-isotropic mode. Bond lengths were constrained using the LINCS method (49). Simulations were carried out for 100 ns, and averaged traces include four independent simulations. All data analysis was done using GROMACS utilities. Ion density numbers were calculated from horizontal stacks across the simulation box through the channel, which means in z direction, using g_density. To avoid artifacts from fluctuations of the box in z direction, every system was centered to a common reference point for the center of mass of the protein with a constant box size using an in-house script (provided with the movie S1 file in the Supplementary Materials). Ions stuck in the membrane were removed from the calculation to reduce the noise level. Density maps were generated with g_densmap, and color scale was normalized according to the percentage of occupancy with blue color corresponding to a Ca2+ ion occupying the position in 100% of simulation time.

All data were processed and plots were prepared using Xmgrace ( For visualization of molecular dynamics trajectories and preparation of figures of protein overview, VMD (visual molecular dynamics) (50) was used. Calculation of local calcium concentration in CAR, with N = 3 Ca2+ ions, NA the Avogadro constant (6.022 × 1023 mol−1), and volume vi (2 × 2 × 0.5 nm3). Amount of substance ni = N/NA= 0.5 × 10−23 mol, molarity ni/vi = 2.5 M.


Human Orai1 (Orai1; accession number NM_032790.3) was provided by A. Rao (Harvard Medical School). N-terminally tagged Orai1 constructs were cloned into the Sal I and Sma I restriction sites of pECFP-C1 and pEYFP-C1 expression vectors (Clontech). Human STIM1 (STIM1; accession number NM_003156) N-terminally ECFP- and EYFP-tagged was provided by T. Meyer (Stanford University). GFP-NFAT was provided by R. Kehlenbach (The Scripps Research Institute). pNFAT-TA-mRFP (NFAT-driven RFP expression) was provided by Y. Usachev (University of Iowa). Cysteine-free hOrai1 Δ1–64, N223A, was cloned into the T/A site of pcDNA3.1/V5-His-TOPO vector (Invitrogen) without any additional tag by polymerase chain reaction amplification. For cross-linking mutants, a cysteine-free Orai1 (C126V, C143V, and C195V) analogous to that described by Zhou et al. (51) was generated, the glycosylation site was replaced by an alanine (N223A), and the nonconserved N-terminal region was removed (Δ1–64) to gain a single protein of 25 kD on SDS-PAGE, representing a monomer. Point mutations (N223A, C126V, C143V, C195V, and all engineered cysteine substitutions) were introduced using the QuikChange Site-Directed Mutagenesis Kit (Stratagene). The integrity of all resulting mutants was confirmed by sequence analysis (Eurofins Genomics). For electrophysiological measurements, cysteine/alanine substitutions were introduced into an eYFP-hOrai1 construct (peYFP-C1, Clontech) and an eYFP-hOrai2 construct. Neither the N-terminal region nor the glycosylation site is required for CRAC channel function (15, 52, 53). The modified Orai1 mutants, except of Orai1-P201C, when coexpressed with STIM1 yielded store-dependent activation of inward-rectifying Ca2+ currents [as representatively shown in Fig. 6 (B and C)]. For all tested mutants, correct plasma membrane expression was monitored by fluorescence microscopy (fig. S1F).

Membrane preparation

Human embryonic kidney 293 cells cultured in 12-mm dishes were transfected with 15 μg of plasmid using TransFectin lipid reagent (Bio-Rad) following the manufacturer’s instructions. Twenty-four hours after transfection, cells were harvested and washed twice in a Hank’s balanced salt solution buffer containing 1 mM EDTA. After centrifugation (1000g/2 min), cell pellets were resuspended in homogenization buffer [25 mM tris-HCl (pH 7.4), 50 mM NaCl, protease inhibitor (Roche)] and incubated on ice for 15 min. Lysed cells were passed 10 times through a 27-gauge half-inch needle and centrifuged at 1000g for 15 min at 4°C to pellet debris. A total of 21 μl of the supernatant was analyzed by 12% SDS-PAGE either without or after the addition of 1 mM CuP or 5 mM BMS.

Disulfide cross-linking

A final concentration of 1 mM CuSO4/1.3 mM o-phenanthroline (Sigma) was added to 21 μl of supernatant and incubated for 10 min on ice, and reactions were stopped by the addition of an equal volume of quenching solution [50 mM tris-HCl, 20 mM N-ethylmaleimide, 20 mM EDTA (pH 7.4)]. Samples were mixed with nonreducing Laemmli buffer, heated for 15 min at 55°C, and subjected to a 12% SDS-PAGE. Separated proteins were transferred to a nitrocellulose membrane and immunoblotted with an antibody recognizing Orai1 (Sigma). Each experiment was performed at least five independent times. The quantification of percentage of cross-linking was calculated with the program ImageJ (National Institute of Mental Health).

Electrophysiological recordings

Human embryonic kidney 293 cells were transfected (TransFectin, Bio-Rad) with 1 μg of mCherry-STIM1 and 0.5 μg of DNA of eYFP-Orai1 constructs. Electrophysiological experiments were performed 24 to 34 hours after transfection using the patch-clamp technique in whole-cell recording configurations at 21° to 25°C. An Ag/AgCl electrode was used as reference. Voltage ramps were applied every 5 s from a holding potential of 0 mV, covering a range of −90 to 90 mV over 1 s. For passive store depletion, the internal pipette solution included 145 mM Cs methane sulfonate, 20 mM EGTA, 10 mM Hepes, 8 mM NaCl, 3.5 mM MgCl2 (pH 7.2). Standard extracellular solution consisted of 145 mM NaCl, 10 mM Hepes, 10 mM CaCl2, 10 mM glucose, 5 mM CsCl, 1 mM MgCl2 (pH 7.4). Where indicated, extracellular CaCl2 was decreased to 0.3 or 1 mM, or monovalent ions were substituted by TEACl. A liquid junction potential correction of +12 mV was applied, resulting from a Cl-based bath solution and a sulfonate-based pipette solution. All currents were leak-corrected by subtracting the initial voltage ramps obtained shortly after break-in with no visible current activation from the measured currents. Averaged currents include n = 6 to 23 experiments.

Fura-2 calcium microscopy

Human embryonic kidney 293 cells were transfected (TransFectin, Bio-Rad) with 0.7 μg of mCherry-STIM1 and eYFP-Orai1 or eYFP-Orai2 constructs or mutants. Twenty to 24 hours after transfection, the cells were loaded with 2 μM Fura 2-AM (Sigma-Aldrich) for 20 min at 20°C in a standard Ca2+-free extracellular solution: 140 mM NaCl, 5 mM KCl, 1 mM MgCl2, 10 mM Hepes, 10 mM glucose. The cells were washed three times, and dyes were allowed to de-esterify for 15 min at 20°C. Individual cells were excited at 340 and 380 nm, and emission was recorded at 505 nm with an inverted Axiovert 100 TV microscope (Zeiss). Changes in [Ca2+]i were monitored using the Fura-2 340/380 fluorescence ratio and calibrated according to the method established by Grynkiewicz et al. (54). Ca2+ entry is presented as nM·s and was estimated using the integral of the rise in [Ca2+]i for 30 min after addition of CaCl2 (300 μM, 500 μM, 1 mM, or 2 mM) corrected by subtraction of the integral over the same period for stimulation in the absence of external Ca2+ (with 100 μM EGTA). Averaged traces include n = 19 to 40 cells.

NFAT translocation

A QLC100 Real-Time Confocal System (VisiTech International) connected to two Photometrics CoolSNAP HQ monochrome cameras (Roper Scientific) and a dual port adapter (dichroic, 505lp; cyan emission filter, 485/30; yellow emission filter, 535/50; Chroma Technology Corp.) was used for recording fluorescence images. This system was attached to an Axiovert 200M microscope (Zeiss) in conjunction with two diode lasers (445 and 515 nm) (Visitron Systems). Image acquisition and control of the confocal system were performed with a VisiView 2.1.1 software (Visitron Systems). Extracellular solution was identical as for fluorescence microscopy but with 0.3 or 1.8 mM CaCl2. Averaged experiments include 5 to 12 experiments.

NFAT-driven RFP expression

RBL cells were electroporated with 6 μg of STIM1, 6 μg of YFP-Orai1 or YFP–Orai1-D110A, and 12 μg of pNFAT-TA-mRFP. Twenty-four hours after electroporation, RBL cells were treated with 100 nM thapsigargin for 3.5 hours in a 0.3 mM Ca2+− or 1.8 mM Ca2+−containing medium. Cells expressing both YFP-Orai1 and NFAT-driven RFP were monitored with an Axiovert 100 TV microscopy, and fluorescence was recorded from individual cells with excitation of 514 and 565 nm, respectively.


Fig. S1. Modeling human Orai1 with molecular dynamics simulations.

Fig. S2. Altered cytosolic Ca2+ concentration in cells expressing STIM1 and the Orai1 CAR mutant.

Fig. S3. Loop1 structure of Orai1 channels.

Fig. S4. Cross-linking assays and molecular dynamics simulations with mutants of loop1 and loop3 of Orai1.

Fig. S5. Orai1-mediated SOCE currents in mutants with loop3 cross-linking.

Fig. S6. Intramolecular coupling of loop1 and loop3 by electrostatic interactions between Asp114 and Lys214.

Movie S1 and centering script. Molecular dynamics simulation of dynamic Ca2+ binding to CAR.


Acknowledgments: We thank T. Stockner (Medical University of Vienna) and D. Reha (Academy of Sciences of the Czech Republic) for technical assistance with lipid parameterization and data analysis, respectively. Human Orai1 was provided by A. Rao (Harvard Medical School). Human STIM1 N-terminally eCFP- and eYFP-tagged was provided by T. Meyer (Stanford University). GFP-NFAT was provided by R. Kehlenbach (The Scripps Research Institute). pNFAT-TA-mRFP was provided by Y. Usachev (University of Iowa). Funding: This work was funded by projects from the Austrian Science Fund (FWF): V286-B21 to I.F., P26067 and P28701 to R.S., P25172 to C.R., P25210 and P27641 to I.D., M01506000 to I.J., P28498 to M.M., and BMWF HRSM project to C.R.; from the Czech Science Foundation (13-21053S) to R.H.E.; and from the German Research Foundation (DFG) SFB1027 project C4 to I.B. Author contributions: R.S., I.F., and R.H.E. conceived the ideas, directed the work, and designed the study. I.F. designed and generated all the plasmid constructs. R.S. and B.L. performed patch-clamp experiments. M.M., I.J., M.L., I.B., and R.S. performed fluorescence experiments. V.Z. and R.H.E. performed computational modeling and molecular dynamics simulations. I.F., M.D., A.H., B.S, T.P., and A.A.S. prepared membranes and cross-linking experiments. I.F, V.Z., I.J., M.M., M.L., I.D., I.B., C.R., R.H.E., and R.S. analyzed the data, with input from the other authors. R.S. and R.H.E. wrote the manuscript. Competing interests: The authors declare that they have no competing interests. Data and materials availability: The structural model for human Orai1 is available in the Model Archive ( with the accession code ma-akdjp doi:10.5452/ma-akdjp. The Perl script for centering the system to a common reference point for the density number calculations is available in the Supplementary Materials.
View Abstract

Stay Connected to Science Signaling

Navigate This Article